irs question

Technical Discussion Forum

Moderator: Sitewide Forum Moderators

Post Reply
donandtheo
1st Gear Member
Posts: 1
Joined: Fri Sep 07, 2012 12:50 pm
antispam: NO
Please enter the middle number: 7

irs question

Post by donandtheo » Fri Sep 07, 2012 1:01 pm

Hay guys new guy here sorry if this has been asked before.
Me and my son are currently builing a sand rail. Frame was bought from Berrien Buggys with the rear torsion housing allready installed the housing has double sping plates on each side the trailing arms i have came of a singal spling plate setup will theses fit and if not what year and car used the double spring plates.

User avatar
Booga-dune-poon
4th Gear Member
4th Gear Member
Posts: 153
Joined: Mon Dec 20, 2010 11:45 am
antispam: NO
Please enter the middle number: 7

Re: irs question

Post by Booga-dune-poon » Sun Sep 09, 2012 7:42 pm

I have a Berrien Crusier frame. I cut the torsion tube out of a 1970 VW type 1. It has double spring plates. It works fine with 3x3 trailing arms.

Image

Image

Image

See it built in pictures here: http://www.americansandassociation.org/ ... 13&t=26717
Kevin

Post Reply

Return to “SandRail • Jeep • OffRoad Vehicle”